Men 3 Layer Dermizax Shell Jacket

Material

Dermizax® 3 Layer Hardshell with Tricot backing Waterproofness: >20000mm (JIS L 1092B-1) Breathability/MVTR >16000mg/m2/24h (JIS 1099B-1) Water Repellency: Initially 90% - 80% after 100 washes (JIS L 0217) Face fabric: 100% Polyester Membrane: 100% Polyurethane Backer: 100% Nylon Dermizax® is a hydrophilic and non-porous membrane, developed and engineered in Japan. Or more simply said, it is a water loving film without holes, that’s responsible for the waterproofness and the breathability of your garment. If you sweat, the humidity inside your garment gets higher. The water loving PU inside the membrane attracts the humidity and leads it to the outside. You want to be dry inside your garment, because only then you will be comfortable. The newly developed QWR impregnation makes the outer fabric even more durably water-repellent than conventional DWR impregnations.

Features

Loose fit for freedom of movement
100 % seamsealed
Waterproof pockets
Waterproof YKK® zippers
Side ventilation openings
Easy-grip zipper pullers
Chin-protection flap
Detachable Snowskirt
Snowskirt with zip-to-pant system
Hood with 2-way adjustment
Helmet fits under storm hood

Size Chart

To help you select the correct size of garment,we've put together our recommendation below

Size Guide Men

Size	Chest, cm	Hip, cm	Inseam leg, cm	Height, cm
S	90	93	78	170–178
M	96	100	80	175–183
L	103	107	82	180–188
XL	110	114	84	185–193
XXL	117	121	86	190–198

How to Measure

Chest contour. Measure around the widest point of the chest,keeping the tape horizontal.

Waist contour. Measure around the narrowest point of the waist, keeping the tape horizontal.

Hip contour. Keeping the feet together, measure around the widest point of the hip, keeping the tape horizontal.

How to choose the Right Size

Measures are expressed in centimetres. If the taken measures are between two sizes, choose the smallest if you prefer a tighter fitting or the largest if you prefer a baggier fitting.

Washing Instruction

Our Shell products are made with a membrane. The garment can be washed at 30 degrees without spinning, with a mild detergent and no softening or rinsing agents. Do not use bleach. We recommend to use a washing product free of surfactants and detergents, fabric softeners, enzymes and perfumes. They may damage the fabric’s water-resistant quality and the colour. Special washing detergents should be available at your favourite outdoor shop and will improve the performance of your products. Ask for „washing products for garments with a membrane and water-repellent coating“. Use water repellent spray on the outside of the product after washing for optimal water-resistance if needed. Dry the garment on a low setting in the dryer, or iron it at a low temperature. Warmth helps to reactivate the DWR (durable water resistance) treatment that's embedded on the surface of your product. Note: Water repellency DWR Our membrane products have a water repellent surface (DWR Durable Water Repellent treatment) when they are new. DWR is a polymer and prevents the fabric from attracting moisture and dirt. When you use your product, this water repellency wears off, particularly at the seat, knees, shoulders and elbows, where the garments are exposed most. For best water repellence, we recommend to re-impregnated after each wash, or when you see parts of the products surface is getting wet.

Men 3 Layer Dermizax Shell Jacket

570.00 CHF 570.00 CHF 570.0 CHF

569.00 CHF

Material

Features

Size Chart

Size Guide Men

How to Measure

How to choose the Right Size

Washing Instruction

Recently viewed Products

Connect with us

Customer Service

Penguin Powderwear. Designed in Switzerland.